PRODUCTS / Wet-type Steel Plate Surface Grinder

 

 

Wet-type Steel Plate Surface Grinder

SINGLE GRINDING HEAD SERIES

TS-25 (Width：600mm)
TS-37 (Width：900mm)
TS-52 (Width：1300mm)

DOUBLE GRINDING HEAD SERIES

TS-252 (Width：600mm)
TS-372 (Width：900mm)
TS-522 (Width：1300mm)

THREE GRINDING HEAD SERIES

TS-253 (Width：600mm)
TS-372 (Width：900mm)
TS-523 (Width：1300mm)

 



GRINDING HEAD CONFIGURATION

  • The sanding belt oscillation is actuated by air cylinder.
  • The sanding belt tracking is controlled by photo-electric sensor.
  • In case mist rack occurs, the machine stops automatically.
  • In case of sanding belt breakage, the machine stops automatically.

VARIABLE FEED SPEED

The machine employs a belt-type variable speed mechanism. Variable feed speed range is form 3.5-9M/min. making the machine suitable for grinding various steel plate materials.


COOLANT ABSORBTION DEVICE
(Optional Accessories for TS-25 and TS-37 Series)

There are two flushing nozzles and coolant absorbing rollers at the outfeed end of the conveyor table. Once the steel plate is ground, dust on the steel plate surface will be washed down, and then the coolant absorbing rollers will completely absorb the water.

Magnetic Separator

Paper Filter

COLLANT SYSTEM

  • Choice of magnet-type or paper-type filters to meet workpiece characteristics.
  • The coolant system is equipped with a powerful suction pump for sufficient coolant flow, which assures an excellent grinding effect and long service life of sanding belt.

Operation panel

 

 

POWERED ELEVATION OF GRINDING HEAD

  • The grinding head elevation is powered by a motor, providing convenient adjustment for grinding head positioning.
  • A micrometric adjustment handwheel is provided on the motor shaft for accurate adjustment of grinding head position.